What colour should a watermark be?

Over a light grey a black mark stands out far more than a white one; over a dark grey it is the reverse. In our measurements at 70% opacity, black reached 8.11:1 over a light grey and white reached 6.10:1 over a dark grey. We suggest choosing the colour for the area behind the mark.

Published . Drafted with AI assistance and checked against the sources linked on this page. How we write our guides.

Watermark color and background: white, black or grey

We placed white and black marks at several opacities over flat greys and worked out the contrast ratio between marked and unmarked pixels, using the formula from WCAG 2.2: (L1 + 0.05) / (L2 + 0.05), where L1 is the relative luminance of the lighter colour and L2 of the darker. Ratios run from 1 to 21, and relative luminance from 0 (darkest black) to 1 (lightest white). WCAG defines the ratio for text on its background; we use it only as a scale for how far a mark stands out, not as a rule for watermarks. The method is in what opacity should a watermark be.

Contrast ratio by mark colour and opacity, over a light grey (0.9) and a dark grey (0.05)
OpacityWhite on lightBlack on lightWhite on darkBlack on dark
20%1.021.611.811.22
50%1.053.873.981.55
70%1.078.116.101.76

The pattern is plain. Over the light grey, black wins by a wide margin; over the dark grey, white does. The limits are firm in this data: a white mark never reaches 2:1 over a grey of relative luminance 0.6 or lighter, even at full opacity, and a black mark cannot get past about 2:1 over a grey of 0.05.

The two are close over a mid-dark grey of 0.2 at 40% opacity: 1.92:1 for white and 2.12:1 for black. Over a grey of 0.4 at 40%, black is ahead again, with 2.47:1 against 1.45:1 for white.

We tested white and black marks only, on flat greys. Grey marks, brand colours and other coloured marks were not tested, so we give no numbers for them.

Brand colour or a neutral one

Whether to use a brand colour is a matter of taste, and we have no data on it, so what follows is our advice. A neutral white or black is the easier choice to judge, because our numbers cover those. A brand colour can work when the area behind it stays clearly lighter or darker than the mark; check it on your lightest and darkest photos.

A logo keeps its own colours. Our site's advice: a mid-tone logo, or one with a thin outline in a contrasting colour, reads on both light and dark pictures. For text, we suggest the Outline option, and leaving Soft shadow on (it starts on), when one photo has both bright and dark areas. We did not measure either, so the table does not cover them. For where on the photo the mark sits, see where to put a watermark on a photo.

How to change watermark color in our tool

In the Fix Watermark photo tool (steps checked November 2026):

  1. In the Your watermark panel, make sure Watermark type is Text and type your text in Watermark text.
  2. In the text settings, beside Font, click the Colour picker and choose a colour. It starts as white.
  3. For a photo with bright and dark areas, switch on Outline; Soft shadow starts switched on. The outline's starting colour follows the text: black when the text is light, white otherwise.
  4. Adjust Opacity (%) under Size and look.

The Colour control is for text. A logo keeps its own colours, so choose a logo file that suits the picture.

Watermark color in Word

Microsoft spells it "Color". On a Mac, Microsoft's Insert a watermark page says Design > Watermark opens the Insert Watermark dialog, where you choose Text and type your own text or pick one such as DRAFT. It then says you can customize the watermark by setting the font, layout, size, colors and orientation.

For a Windows text watermark, Microsoft's Custom Watermark page names no colour option, so the route below is the one on Microsoft's washout page. In Word for Microsoft 365 on Windows (steps checked October 2026):

  1. Open the header and click the watermark.
  2. Under WordArt Tools, choose Format > Shape Fill > More Fill Colors.
  3. Adjust Transparency.

For a picture watermark on Windows, the same page says to try Picture Tools > Format with Recolor, Brightness or Contrast. On a Mac the page says to replace the watermark with a new one, using Font Color or Transparency. More on transparency is in how to change watermark transparency in Word.

Watermark color code

A colour code is a short text that names a colour. Our tool stores a text colour as a hex code, written #RRGGBB; white is #ffffff.

Sources

Checked October 30, 2026.

Questions

What colour should a watermark be?
Black over light areas and white over dark areas, in our data. At 70% opacity, black reached 8.11:1 over a light grey and white reached 6.10:1 over a dark grey.
Is a grey watermark better?
We did not test grey marks, so we cannot say. Our data covers white and black marks over flat greys only.
Why can't I see my white watermark?
Over a light grey of 0.9 a white mark stays near 1:1 from 20 to 70% opacity in our data, and it never reaches 2:1 over a grey of 0.6 or lighter. Try black, or an outline.
How do I change the colour of a watermark in Word?
On Windows, open the header, click the watermark, then use WordArt Tools > Format > Shape Fill > More Fill Colors. On a Mac, Microsoft says to replace the watermark with a new one.
What is a watermark colour code?
A short piece of text that stands for a colour. Our tool stores its text colour as a hex code such as #ffffff, which is white.