How to make a tiled watermark that repeats across a photo

In our photo tool, tick Repeat as a pattern and the mark repeats across the whole picture. A new pattern starts with a gap of 60, staggered rows and a pattern angle of -30 degrees. The PDF tool has the same control and repeats the mark on each page.

Published . Drafted with AI assistance and checked against the sources linked on this page. How we write our guides.

Tiled watermark generator: repeat a mark across a photo

A tiled watermark is one mark copied across the whole frame in rows. In the Fix Watermark photo tool it is a single checkbox in the Placement section.

In the Fix Watermark photo tool (steps checked November 2026):

  1. In the Your watermark panel, type your name or website in Watermark text, or switch Watermark type to Logo and choose your file.
  2. In the Placement section, tick Repeat as a pattern. Three more settings appear.
  3. Set Gap between marks (% of mark width). The slider runs from 0 to 200 and starts at 60.
  4. Leave Stagger every other row ticked to shift each second row by half a step, or untick it for a plain grid.
  5. Set Pattern angle (degrees), from -90 to 90. It starts at -30.
  6. Under Size and look, lower Opacity (%) until the photo reads clearly through the marks.

Two details help you predict the result. Along a row, the distance between marks is the mark's width plus the gap; between rows it is the mark's height plus the same gap. The gap is a percentage of the mark's width, so a bigger mark gets a bigger gap at the same setting. Each mark is also turned by the single-mark Rotation (degrees) plus the pattern angle. While the pattern is on, the position grid is switched off, because the marks cover the whole picture.

Those values are the tool's defaults, not a recommendation. We have no measurement of which gap or angle works best, so judge it in the preview on your own picture.

When a tiled watermark suits

We suggest a tiled mark where seeing the work matters more than a perfect picture: client proofs, previews and drafts. A mark that repeats at an angle means every part of the photo carries your name. For a photo that should stay easy to enjoy, such as a gallery or a listing, our site's advice is a single corner mark, which covers one small area; see where to put a watermark on a photo.

For client work, the settings we suggest for a PROOF mark are in how to add a PROOF watermark to client photos.

Repeating text watermark: opacity that keeps the photo readable

A tiled mark covers far more of the picture than a corner mark, so we suggest a lower opacity than you would use for one mark. That is our advice, not a measured result.

What we can quote is how a single mark behaves over flat greys. In our measurements (dataset opacity-contrast, computed on flat greys, not on real photographs), over a light grey of relative luminance 0.9 a black mark reaches a contrast ratio of 1.61:1 at 20% opacity and 8.11:1 at 70%, while a white mark reaches 1.02:1 at 20% and 1.07:1 at 70%. Over a dark grey of relative luminance 0.05 a white mark reaches 1.81:1 at 20% and 6.10:1 at 70%, and a black mark 1.22:1 and 1.76:1. We did not test tiled marks, so treat these as a guide to colour and opacity, not to spacing. The method and the full table are in what opacity should a watermark be.

The practical reading: pick a mark colour that suits most of the picture, then lower the opacity step by step. Our Opacity (%) slider starts at 50.

Repeat watermark in PDF

The PDF tool uses the same panel, so Repeat as a pattern, Gap between marks (% of mark width), Stagger every other row and Pattern angle (degrees) are the same controls. Our PDF page says a mark repeated across each page suits Confidential or Sample copy. There the size slider reads Size (% of page width).

Free: up to 3 PDFs per run, every page, unlimited runs. Nothing of ours added.

The saved file is a new copy and your original PDF is not changed, as our PDF page says. The same page says the mark is not selectable or searchable text in the saved PDF.

Photoshop repeating watermark: define a pattern

What Adobe documents for Photoshop is a pattern you define and then fill with. The Adobe pages we read do not mention watermarks, pattern angle or spacing, so what follows is only the pattern route, not a full watermark recipe.

In Photoshop on desktop (steps checked November 2026; Adobe's page names no version), from Adobe's Create a new pattern page:

  1. Select View > Pattern Preview to turn Pattern Preview on.
  2. Add text, images, colors or shapes.
  3. Select Edit > Define Pattern. The saved pattern appears in the Patterns panel.

Adobe's Define an image as a preset pattern page describes another start: select an area with the Rectangular Marquee tool, choose Edit > Define Pattern, enter a name and select OK.

To fill with a saved pattern, Adobe's Use Content-Aware, Pattern, or History fills page says:

  1. Select Edit > Fill.
  2. In the Contents menu, choose Pattern, then pick a pattern from the Custom Pattern menu.
  3. Under Blending, choose the Mode and Opacity, then select OK.

The Adobe pages we read do not explain how to make a pattern that is transparent around the mark, so we give no steps for that. If you want the angle and spacing set with sliders and previewed on the photo, that is what our photo tool does.

Sources

Checked October 30, 2026.

Questions

How do I make a watermark repeat across a photo?
In our photo tool, tick Repeat as a pattern, then set Gap between marks, Stagger every other row and Pattern angle. A new pattern starts with a gap of 60, staggered rows and an angle of -30.
Can I tile a watermark on a PDF?
Yes, in our PDF tool: the same Repeat as a pattern control repeats the mark across each page. Free: up to 3 PDFs per run, every page, unlimited runs. Nothing of ours added.
What gap and angle should I use?
We have no measurement that picks one. The tool's defaults are a gap of 60 and an angle of -30; adjust them in the preview on your own picture.
Does a tiled mark need a lower opacity?
We suggest so, because it covers the whole frame. Our contrast data covers single marks over flat greys only, so it guides colour and opacity but not spacing.
Can Photoshop repeat a watermark?
Adobe documents defining a pattern with Edit > Define Pattern and filling with Edit > Fill using the Pattern option. The Adobe pages we read do not call this a watermark or cover angle and spacing.