How to change the transparency of a watermark in Word

In Word, open the header and select the watermark. On Windows, a text watermark has Shape Fill with a lighter or darker shade and a Transparency setting under More Fill Colors; a picture has Recolor, Brightness and Contrast. On a Mac, a picture has Picture Transparency in Format Picture.

Published . Updated . Drafted with AI assistance and checked against the sources linked on this page. How we write our guides.

Watermark transparency in Word

Microsoft's page on the washout effect of a watermark is the one that covers this, for Word for Microsoft 365 on Windows and Mac and for Word 2024, 2021, 2019 and 2016. It opens by telling you to go to File > Print to see how your watermark will look on the page. We suggest keeping that preview open in mind for every change below, because the washout page gives no percentage, default or recommended value for any of these options.

The controls are in the document's header, which is where Microsoft says a watermark is usually kept (Microsoft). That page says to double-click near the top of the page to open the header, then click the watermark to select it. On Windows, a text watermark then brings up a WordArt tab, and a picture watermark a Picture Format tab. The washout page, used below, calls the same areas WordArt Tools and Picture Tools, so look for either name.

Make a text watermark lighter in Word on Windows

Microsoft's route for text on Windows, in Word for Microsoft 365 (steps checked November 2026):

  1. Double-click near the top of the page to open the header.
  2. Move the cursor over the watermark until you see the four-headed arrow, then click the watermark to select it.
  3. Under WordArt Tools, select Format, then Shape Fill.
  4. Choose a lighter or darker shade, or select More Fill Colors and adjust Transparency.
  5. Select OK.

The word "Semitransparent" does not appear on the Microsoft watermark pages we read, so we do not list a checkbox by that name. The control Microsoft names for text is Transparency, reached through More Fill Colors.

Make a picture watermark lighter in Word

For a picture on Windows, the same page has you open the header and select the watermark in the same way. Then, under Picture Tools, select Format and try Recolor, Brightness or Contrast. Microsoft says "try", and it does not say which setting makes the picture lighter, so judge by the print preview.

Newer Word versions name the same area the Picture Format tab. Microsoft's general page on brightness and contrast of a picture has you select the picture, then on the Picture Format tab, in the Adjust group, select Corrections and click a thumbnail under Brightness/Contrast. To fine tune, the same page says to click Picture Corrections Options and move the slider for Brightness or Contrast, or enter a number in the box next to it. That page is general picture help and does not mention watermarks.

On a Mac, the washout page says to double-click the watermark in the header to open Format Picture, select the Picture tab, and try Picture Transparency or Picture Corrections. When you first insert a picture watermark on a Mac, Microsoft's picture watermark page has you choose Design > Watermark, select Picture > Select Picture, and next to Scale make sure Auto is selected and Washout is checked, then choose OK. Microsoft's Windows steps on that page do not list a Washout checkbox. Microsoft's general picture colour page, on its macOS tab, describes Picture Transparency in the Format Picture pane as presets, a slider or a number box; that page does not mention watermarks.

Microsoft's page on making a picture transparent, with percentages from 0 to 100, does not list Word among the apps it covers, so we do not describe those presets here.

Make a text watermark lighter in Word on a Mac

For text on a Mac, Microsoft says to change the look of a watermark by replacing it with a new one. Select Design > Watermark, choose Text, enter the text, and try Font Color or Transparency before you select OK (Microsoft). If the watermark is not visible, Microsoft's insert a watermark page says View > Print Layout shows it and shows how it will print.

How to darken or recolour a watermark in Word

For text, the colour routes are the ones above: on Windows, Shape Fill offers a lighter or darker shade and More Fill Colors; on a Mac, the replacement watermark has Font Color. For a picture, the washout page lists Recolor on Windows and, on a Mac, Picture Transparency and Picture Corrections, without saying which of them changes colour. Microsoft's general picture colour page says Color on the Picture Format tab has Color Saturation, Color Tone and Recolor presets, such as grayscale or sepia tone, and that More Variations > More Colors lets you customize your own colour for a picture. That page does not mention watermarks, so we cannot say these apply to a picture watermark. For an exact colour we suggest putting that colour into the image file before you insert it.

How light should the watermark be?

This is our advice, not Microsoft's. Start from the print preview and move the setting toward lighter until the page text reads easily at a glance, then stop; a mark you can barely see has stopped doing its job. We cannot give you a Word percentage, because Microsoft states none. The 40 to 60% range in our guide to watermark opacity was worked out on flat greys and generated test images, not on Word pages, so do not carry it over. For the basic insert steps, see how to add a watermark in Word, and if the mark does not appear at all, why a Word watermark is not showing.

Set the transparency on a PDF instead

If you only need the mark on a PDF, our PDF watermark tool has an Opacity (%) slider that runs from 0 to 100, and the preview updates as you move it. Free: up to 3 PDFs per run, every page, unlimited runs. Nothing of ours added.

Sources

Checked October 30, 2026.

Questions

Where is the Semitransparent option in Word?
It does not appear on the Microsoft watermark pages we read. Microsoft names Transparency for text and Picture Transparency on a Mac for pictures.
How do I make a picture watermark lighter in Word on Windows?
Open the header, select the watermark, and under Picture Tools, Format, try Recolor, Brightness or Contrast. Check the result in File, Print.
What transparency percentage should I use?
Microsoft's watermark pages give no percentage for Word. We suggest moving toward lighter until your page text reads easily, judged in the print preview.
Can I change a watermark in Word for the web?
No. Microsoft says Word for the web shows watermarks already in a document but cannot change them or insert new ones.