How to add a watermark in Final Cut Pro
In Final Cut Pro for Mac, connect your logo image above the primary storyline, then lower its Opacity in the Compositing section of the Video inspector. Apple's Transform controls set its position and size, and a connected Basic Title can serve as a text mark. Apple's pages do not call this a watermark.
Published . Drafted with AI assistance and checked against the sources linked on this page. How we write our guides.
How to add a logo in Final Cut Pro
The Apple pages we cite do not use the word watermark for this job. They describe three building blocks that, in our reading, make one: a connected clip, the Opacity control and the Transform effect. Apple's connected clips page says video clips are connected above the primary storyline
, and that the topmost video clips block out any video clips below them, except clips with some type of transparency, keying or compositing settings. A logo with solid pixels therefore hides what is under it until you lower its opacity.
Apple's Final Cut Pro User Guide pages describe Final Cut Pro for Mac, and the version list on the pages starts at 12.4. The pages themselves do not say which version they were written for. Steps below come from the connected clips page and Apple's opacity page (steps checked November 2026):
- Select your logo image in the browser. Apple's still images page says an imported still image works like any other clip.
- Position the playhead over a frame of the clip in the primary storyline. Apple says the first frame of the selection is connected at the playhead, so to start the logo at the beginning, put the playhead there.
- Choose Edit > Connect to Primary Storyline (or press Q), or click the Connect button in the top-left corner of the timeline. The page says video clips connect above the primary storyline.
- Select the logo in the timeline and, in the Compositing section of the Video inspector, lower Opacity. The page says the closer the setting is to 0 percent, the more transparent the clip becomes.
The still images page also says you can drag a still image from the Photos, Videos, and Audio sidebar or the Finder directly into the timeline. The pages we cite give no recommended opacity percentage, so choose by eye. Our guide to watermark opacity may help.
Final Cut Pro overlay image: size, position and duration
Apple's Transform page says you can resize, move and rotate an image with the Transform built-in effect. In the Video inspector, Position X and Y move the image left and right and up and down, and Scale changes its size. For onscreen controls, select the clip, choose Transform from the pop-up menu in the lower-left corner of the viewer (or press Shift-T), drag the blue corner handles to resize, drag inside the image to move it, then click Done.
For a logo that stays up for the whole video, note that a still image has a default duration of 4 seconds. Apple says you can change that default in the Editing pane of Final Cut Pro settings, that there is no limit on the duration of a still-image clip, and that to change the duration of selected stills you choose Modify > Change Duration (Control-D). Apple also says connected clips move or delete along with the primary storyline clips they are attached to.
If your logo is a layered graphic with a transparent background, such as a PSD, Apple says to set the project's rendering format to Apple ProRes 4444 to preserve the transparency when rendering.
Final Cut Pro overlay text: use a title as the watermark
For a text mark, Apple's titles page says to choose Edit > Connect Title > Basic Title (or press Control-T). Apple says the title is superimposed over the clip in the primary storyline at the playhead position, and its titles introduction says that when you add a title as a connected clip directly above another clip, the underlying clip appears as the title's background.
Apple's title editing page says you can edit title text and change a title's style, colour and opacity. You edit the text in the viewer or in the Text inspector, and adjust the appearance using the Title and Video inspectors. In the Text inspector, the Face, Outline, Glow and Drop Shadow sections each list an opacity setting.
Final Cut Pro logo overlay with the Compressor Watermark effect
Compressor, a separate Apple app, has a Watermark video effect. Apple's Compressor page says it Superimposes a still image or a movie file onto the video.
Its properties are Position, Scale by, Alpha, Repeat and Watermark, where you click Select to choose the file. Alpha runs from 0 (completely transparent) to 1 (completely opaque). Apple's page on adding effects says to select an applied or custom preset, then, in the Video Effects section at the bottom of the Video inspector, click the Add Video Effect pop-up menu and choose an option.
Compressor and Final Cut Pro are separate apps. The pages we cite do not say that Final Cut Pro's own export includes the Compressor effect, and the Compressor page gives no version number.
Another route: mark the exported file
If you only need a mark on a finished file, Fix Watermark adds a text or logo watermark to a video in your browser, and nothing is uploaded. Open the video watermark tool. Free: videos up to 60 seconds. Nothing of ours added. Pro removes the limit; your device sets the rest. Working in another editor? See our guides to Premiere Pro and iMovie, or watermarks for YouTube.
Sources
Checked November 8, 2026.
- support.apple.com/guide/final-cut-pro/ver7a77ef9e/mac
- support.apple.com/guide/final-cut-pro/ver52cf3376/mac
- support.apple.com/guide/final-cut-pro/verfc8a3df7/mac
- support.apple.com/guide/final-cut-pro/verfc8a4713/mac
- support.apple.com/guide/final-cut-pro/ver4e3251c/mac
- support.apple.com/guide/final-cut-pro/ver4e3354c/mac
- support.apple.com/guide/final-cut-pro/ver4e32ca5/mac
- support.apple.com/guide/compressor/cpsrcbbd612d/mac
- support.apple.com/guide/compressor/cpsrb72504ce/mac
Questions
- Does Final Cut Pro have a watermark effect?
- The Final Cut Pro pages we cite describe connected clips, Opacity and Transform rather than a watermark effect. Apple's separate Compressor app has a Watermark video effect.
- Where is the Opacity control for a logo in Final Cut Pro?
- In the Compositing section of the Video inspector, per Apple.
- How do I add text as a watermark in Final Cut Pro?
- Choose Edit, Connect Title, Basic Title (or press Control-T), then edit the text in the viewer or the Text inspector. Apple says the Text inspector's Face section has an opacity setting.
- How long does a logo image stay on screen by default?
- Apple says a still image defaults to 4 seconds and has no maximum duration, so you can lengthen it.