How to make a watermark in Krita
In Krita 5.3, make a watermark as a layer: use the Text Tool, or import a logo with Layer > Import/Export > Import Layer, then set the Opacity slider in the Layers docker. Save a .kra working file first, then flatten the image and save it in a web format.
Published . Drafted with AI assistance and checked against the sources linked on this page. How we write our guides.
Krita add watermark: a layer above the artwork
We found no watermark feature in the Krita 5.3 manual, so a Krita watermark here means a layer you make from documented tools. The manual's layers page says Krita composites layers from bottom to top, so a text or logo layer placed above your artwork shows on top of it. The steps below come from the Krita 5.3.0 manual; its pages do not split by platform.
Krita create watermark: text with the Text Tool
The manual's Text Tool page says that clicking on the canvas creates a text with "Placeholder Text" ready for editing, and that to change the styling you use the Text Properties Docker. Its working with text page says the font and text size are set in the Text Properties Docker, and that a colour can be chosen from any of Krita's colour selectors.
In Krita 5.3 (steps checked November 2026):
- Choose the Text Tool and click on the canvas.
- Type your name or copyright line; the manual says a new text starts with "Placeholder Text", ready for editing.
- Set the font and size in the Text Properties Docker, and choose a colour from a colour selector.
- To finish editing, click outside the text box.
To move the text afterwards, the manual says to hover over its bounding box and drag.
Krita watermark image: import a logo as a layer
The Layer menu page lists Import Layer under Import/Export, described as importing an image as a layer into the current file. The same group offers Import as..., which imports an image as a specific layer type. The page does not describe where the imported image lands on the canvas. For the file itself, our guide to a transparent PNG logo covers preparing it, and our signature watermark guide covers a handwritten mark.
In Krita 5.3 (steps checked November 2026):
- Choose Layer > Import/Export > Import Layer to import your logo or signature image as a layer.
Set the watermark layer's opacity
The Layers docker page lists four controls at the top of the docker: Blending mode, Opacity, Filter and Display settings. Opacity is "a slider to set the opacity for the active layer", so select the watermark layer and move the slider. The manual gives no recommended value for a watermark.
Krita watermark brush: what the manual shows
Krita's brush tips page says predefined brush tips can come from GBR, GIH and ABR files. Its Color Image brush mode uses the brush tip image exactly as it is, which the page calls especially useful for image stamps. That is the manual's description of how a tip paints; the page does not describe making a tip from your own signature or logo.
The only place we found Krita's manual using the stamp button to build a tip from your own images is its animated brushes tutorial. It says to go into the brush settings (F5 key), go to predefined brush tips and click stamp. That tutorial is about image hoses, with one layer per frame, and does not mention a signature or a single logo image. We therefore give no brush recipe here. For a signature or logo you will reuse, we suggest an imported layer.
Export a marked copy and keep the original unmarked
Krita's saving for the web tutorial says Krita's default saving format is the .kra format, and gives this order: save as a .kra, which is your working file and serves as a backup if you make any mistakes; flatten with Layer > Flatten Image or Ctrl+Shift+E; then save in a web format. It says saving with transparency is only possible with GIF and PNG. The File menu page describes Export as the command for additional formats, some of which Krita may not open again, and Export Advanced... as similar but with crop and resize options.
Our suggestion, not Krita's: save the .kra with your artwork and no mark first, add the watermark layer, and export the marked copy under a new file name, so your original stays as it was. The tutorial does not say whether Export leaves layers untouched in the open document, so check your layers panel after exporting.
If you have many images to mark, or no Krita at hand, our logo watermark tool adds a logo to photos in your browser, and nothing is uploaded. Free: up to 50 photos per run, and runs are unlimited. No watermark of ours on your photos, ever. Original pixel size; JPEG and WebP are re-encoded at the quality you choose. For sharing art online, see our guide to protecting art online, and for the same job on a tablet, our Procreate watermark guide.
Sources
Checked November 8, 2026.
- docs.krita.org/en
- docs.krita.org/en/user_manual/layers_and_masks.html
- docs.krita.org/en/reference_manual/tools/text.html
- docs.krita.org/en/user_manual/working_with_text.html
- docs.krita.org/en/reference_manual/main_menu/layers_menu.html
- docs.krita.org/en/reference_manual/dockers/layers.html
- docs.krita.org/en/reference_manual/brushes/brush_settings/brush_tips.html
- docs.krita.org/en/tutorials/krita-brush-tips/animated_brushes.html
- docs.krita.org/en/tutorials/saving-for-the-web.html
- docs.krita.org/en/reference_manual/main_menu/file_menu.html
Questions
- How do I add a text watermark in Krita?
- Click on the canvas with the Text Tool, enter your text, and set the font and size in the Text Properties Docker. Click outside the text box to finish editing.
- How do I add a logo to a Krita painting?
- Use Layer > Import/Export > Import Layer to bring the image in as a layer, then set its opacity in the Layers docker.
- Can I make a watermark brush in Krita?
- The manual pages we read describe brush tips from image files and a stamp button in the animated brushes tutorial, but give no recipe for a signature or logo brush. We suggest an imported layer instead.
- How do I keep my original Krita file unmarked?
- Krita's tutorial says to save a .kra as your working file before flattening and saving a web format. We suggest saving the unmarked .kra first and exporting the marked copy under a new name.